OMRON E3Z-G catalog

• Catalog
• Manual
• CAD

English

Global Edition

For ordering in Singapore, please note some product models not sold in Singapore may be included in the following catalog(s) for our global customers.

*It is recommended to select “Save” from the right-click due to large size of catalog PDF data.

Catalog Name	Catalog Number [size]	Last Update
E3Z-G Data Sheet	- [724KB]	Apr 02, 201820180402	E3Z-G Data Sheet

OMRON E3Z-G specification

last update: January 31, 2013

Number of optical axes			1	2
Model		NPN output	E3Z-G61/E3Z-G61-M3J	E3Z-G62/E3Z-G62-M3J
		PNP output	E3Z-G81/E3Z-G81-M3J	E3Z-G82/E3Z-G82-M3J
Sensing distance (distance between arms of groove)			25 mm
Standard sensing object			Opaque, 1.5-mm dia. min.
Light source (wavelength)			Infrared LED (940 nm)
Power supply voltage			12 to 24 VDC±10%, ripple (p-p): 10% max.
Current consumption			25 mA max.	40 mA max.
Control output			Load power supply voltage: 26.4 VDC max. Load current: 100 mA max. (Residual voltage: 1 V max.) Open collector output (NPN or PNP depending on model) Light-ON/Dark-ON selectable
Protection circuits			Reversed power supply polarity protection, Output short-circuit protection, and Mutual interference prevention
Response time			Operate or reset: 1 ms max.
Ambient illumination (Receiver side)			Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max.
Ambient temperature range			Operating: -25 to 55°C, Storage: -40 to 70°C (with no icing or condensation)
Ambient humidity range			Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance			20 MΩ min. at 500 VDC between lead wires and case
Dielectric strength			1,000 VAC, 50/60 Hz for 1 min between lead wires and case
Vibration resistance			Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance			Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection			IP64 (IEC 60529)
Connection method			Pre-wired cable (standard length: 2 m and 0.5 m)/Pre-wired Connector (standard length: 300 mm)
Indicator			Operation indicator (orange)
Weight (packed state)	Pre-wired (with 2-m cable)		Approx. 65 g
	Pre-wired Connectors		Approx. 30 g
Material	Case		ABS (Acrylonitril Butadiene Styrene)
Accessories			Instruction manual

last update: January 31, 2013

OMRON E3Z-G dimension

last update: January 31, 2013

Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.

Sensors

E3Z-G61
E3Z-G62

* On the other side
Note: Both 1 and 2-axis models have S1; only 2-axis models have S2.
*S1 output: Black
*S2 output: White

last update: January 31, 2013

OMRON E3Z-G lineup

last update: April 2, 2018

Sensors

Sensing method	Appearance	Connection method	Sensing distance	No. of optical axes	Model
					NPN output	PNP output
Through- beam		Pre-wired (2 m)	25 mm (Infrared light)	1	E3Z-G61 2M *1 *2	E3Z-G81 2M *1 *2
		Pre-wired Connector (M8, 4 pins)			E3Z-G61-M3J 0.3M	E3Z-G81-M3J 0.3M
		Pre-wired (2 m)		2	E3Z-G62 2M *1	E3Z-G82 2M *1
		Pre-wired Connector (M8, 4 pins)			E3Z-G62-M3J 0.3M	E3Z-G82-M3J 0.3M

*1. M12 Standard Pre-wired Connector Models are also availavble.
       When ordering, add "-M1J 0.3M" to the end of the model number (e.g., E3Z-G61-M1J 0.3M).
       The cable is 0.3 m long.
*2. M12 Pre-wired Smartclick Connector Models are also availavble.
       When ordering, add "-M1TJ 0.3M" to the end of the model number (e.g., E3Z-G61-M1TJ 0.3M).
       The cable is 0.3 m long.

Accessories (Order Separately)

Sensor I/O Connectors (Sockets on One Cable End)

(Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

Cable specification	Appearance	Type of cable		Model
Standard cable		2 m	4-wire	XS3F-M421-402-A
		5 m		XS3F-M421-405-A
		2 m		XS3F-M422-402-A
		5 m		XS3F-M422-405-A
Vibration-proof robot cable		2 m		XS3F-M421-402-R
		5 m		XS3F-M421-405-R
		2 m		XS3F-M422-402-R
		5 m		XS3F-M422-405-R

Note: Refer to Introduction to Sensor I/O Connectors/Sensor Controllers for details.

Protective Bracket

A Protective Bracket is not provided with the Sensor. Order a Protective Bracket separately if required.

Appearance	Model	Applicable model
	E39-L149	E3Z-G

last update: April 2, 2018

• NO. E3Z-G
• TYPE:Photoelectric Sensors Built-in Amplifier Copyright Statement
• DATE:2021-06-10
• Associated products:
  E3Z-LS Distance-settable Photoelectric Sensor/Features E3S-C Oil-resistive, Long-range Photoelectric Sensor with Metal Housing/Features