OMRON CS1W-LCB01 / LCB05Automation Systems/ Programmable Controllers/CS1

OMRON CS1W-LCB01 / LCB05 Automation Systems

• CS1W-LCB01 / LCB05 Loop Control Boards/Specifications
• CS1W-LCB01 / LCB05 Loop Control Boards/Lineup
• CS1W-LCB01 / LCB05 Loop Control Boards/Catalog
• CS1W-LCB01 / LCB05 Loop Control Boards/Dimensions
• Purchase the OMRON CS1W-LCB01 / LCB05 CS1

OMRON CS1W-LCB01 / LCB05 Dimensions

last update: November 21, 2013

OMRON's PLC-based Process Control = Smart Process Control
General-purpose PLCs provide everything from simple loop control to advanced process control to meet customer needs.

The open nature of the PLCs is joined by integrating hardware, software, and networking to meet your needs.

Increasing amounts of information, standardization, and open standards form the basis for achieving hardware and networking capabilities for process control.
A wide range of software that can be easily used by design, development, and maintenance personnel makes operating and maintaining the system far easier.

*For details on the CJ Series, refer to the Loop-control CPU Units Catalog (R128-E1-01).

Windows is a registered trademark of the Microsoft Corporation. DeviceNet, DeviceNet Safety, CompoNet, and EtherNet/IP are registered trademarks of the ODVA.
Other company names and product names are the trademarks or registered trademarks of the respective companies.

Going Beyond the Traditional Limits of PLCs with PLC-based Process Control

Reducing the Total Cost of Ownership from Initial Costs through Running Costs.
PLC-based Process Control Meets Customer Needs

Existing System Problems

Systems are large, meaning high initial costs.

The over-spec nature of a distributed control system (DCS) increased costs.
PLCs, however, could not provide the required process control capabilities, and signal conversion with isolators and other devices was required for I/O.
It was just not possible to achieve the ideal system for a specific application.

PLC-based Process Control

Down-sizing
Cut costs, Save space, Reduce labor

PLCs provide the some of the functions and performance of DCS while also providing the advanced features of PLCs: Open specs, easy maintenance, and cost performance.
A wide range of Isolated-type Analog Units helps to save space and greatly reduces system costs.

Existing System Problems

Running costs are high because maintenance and modifications require specialists.

The manufacturer must be relied upon for everything from system construction to maintenance.
Even simple changes to parameters cannot be performed in-house.
And, it's nearly impossible to use generalpurpose devices and software (such as HMI devices or Windows-based software) when modifying the system.

PLC-based Process Control

Easy Engineering
Engineering is simple when you can program with function blocks.

Paste function blocks in a window just like you were creating a flow sheet, and then connect the blocks with the mouse to graphically program a wide range of process control.
And with a PLC, it's easy to incorporate general-purpose HMI devices and software (such as touch panels and SCADA software).

Avoid Problems and Minimize Risks with a Duplex System

Increase the reliability of the facilities and devices with a Duplex PLC-based Process Control System.

If an error occurs in the active CPU Unit, the standby CPU Unit takes over in an instant (using the hot standby method) so that system operation continues essentially unaffected.
Other duplex variations are also possible.
For example, instead of duplexing the CPU Unit, Power Supply Unit, and Controller Link Unit, a system can be constructed with a Single-CPU Unit and only a duplex Power Supply Unit or only a duplex Controller Link Unit.

A duplex system means rapid recovery for errors.

Replace Units with power supplied or even while the system is running, including CPU Units (Duplex-CPU system), Power Supply Units, Communications Units, Basic I/O Units, and Special I/O Units.

PLC-based Process Control Application Examples

A Revolutionary Solution to Process Control Advanced Controller Functions in a PLC

For easier loop control, for advanced PLC-based analog control:
The New SYSMAC CS1-based Solution

Existing System Problems

Excessive installation space is required.

When using more than one controller for multi-loop control, the control panel is just too big.
And specification changes required altering the control panel, making changes difficult.

PLC-based Process Control

Down-sizing
Consolidate the functions of many controllers

Programming is as simple as combining the function blocks required by the application.
To increase the number of controlled loops, just add them to the program.
HMI windows can also be created easily using a wide range of utility software.

Existing System Problems

Programming communications with the controllers is extremely difficult.

Communications must be programmed to input data to the PLC.
And communications time can restrict control performance.
The more controllers that are used, the more difficult maintenance becomes.

PLC-based Process Control

Easy Engineering
Advanced controller functions are built into the CS1 PLCs. No programming is required for communications.

The Loop Control Boards and Units were designed for the CS1 PLCs and require no communications programming.
High-speed, flexible data links can be created with the PLC to increase control performance.

last update: November 21, 2013

Purchase the OMRON CS1 Please fill in the following

---

OMRON CS1W-LCB01 / LCB05 specification

CS1W-LCB01 / LCB05 Loop Control Boards/Specifications

last update: December 3, 2018

General Specifications

Item		Specifications
Name		Loop Control Boards
Unit classification		CS-series Inner Boards
Model number		CS1W-LCB01: Standard Inner Board	CS1W-LCB05(-GTC): Special Inner Board	LCB05D: Duplex Inner Board
Applicable CPU Units		CS1G/H-CPU[][]H CS1D-CPU[][]S/SA (See note 1.)	CS1G/H-CPU[][]H CS1D-CPU[][]S/SA (See note 1.)	Built into the CS1D-CPU6[]P.
Mounting location		Inner Board slot in CPU Unit
Number of Boards/Units		1 Board max. per CPU Unit
Data exchange with CPU Unit	I/O memory	User Link Tables: ITEM data for function blocks can be allocated in any part of I/O memory (CIO, WR, HR, or DM Areas, or EM Area bank 0).
	All data	HMI function used to allocate function block ITEM data for Control, Operation, and External Controller blocks in the specified bank of the EM Area in the CPU Unit. (Default: Bank 0)
Setting switches		None
Indicators		3 LEDs: RUN, ready, and communications port send/receive
Front panel connections		RS-232C port x 1 (The CS1D-LCB05D cannot be used to connect to the ES100X Controller.)
Data backup		By super capacitor: All function block data (including sequence tables and step ladder instructions)
Battery /capacitor life		24 hours at 25°C (life shortened by use at higher temperatures)
Data storage in flash memory		Function block data (RAM data backup and recovery can be performed whenever necessary.) Error log data
Effect on CPU Unit cycle time		0.8 ms max.		25 ms max. (See note 2.)
Current consumption (supplied from Power Supply Unit)		220 mA at 5 V DC (Increased by 150 mA when NT-AL001-E Link Adapter is used.)
Dimensions		34.5 × 130 × 100.5 mm (W × H × D)
Weight		100g max.
Standard accessories		None

Note: 1. A Loop Control Board Unit Ver. 1.5 or later is required for use. Do not use a Loop Control Board with a unit version earlier than 1.5.
Note: 2. During duplex initialization: 2.1 s max.

last update: December 3, 2018

OMRON CS1W-LCB01 / LCB05 lineup

CS1W-LCB01 / LCB05 Loop Control Boards/Lineup

last update: December 3, 2018

Loop Control Boards

Unit name	Specifications	Model
Loop Control Boards	No. of function blocks: 50 blocks max.	CS1W-LCB01
	No. of function blocks: 500 blocks max.	CS1W-LCB05
		CS1W-LCB05-GTC

Note: Use a CS1D-CPU6[]P CSID Process-control CPU Unit (for Duplex-CPU System) when duplex operation is required.
Use the CS1W-LCB0[] Loop Control Board when using a CS1D CPU Unit for a Single-CPU System

Support Software

Product name	Specifications			Model
		No. of licenses	Media
FA Integrated Tool Package CX-One Ver. 4.[]	The CX-One is a comprehensive software package that integrates Support Software for OMRON PLC's and components. CX-One runs on the following OS. OS: Windows XP (Service Pack 3 or higher, 32-bit version)/Windows Vista (32-bit/64-bit version)/ Windows 7 (32-bit/64-bit version)/Windows 8 (32-bit/64-bit version)/Windows 8.1 (32-bit/64-bit version)/Windows 10 (32-bit/64-bit version) CX-One version 4.[] includes CX-Process Tool Ver.5.[] and FacePlate Auto-Builder for NS Ver.3.[]. For details, refer to the CX-One Introduction Guide (Cat. No. R134).	--- (Media only) *	DVD	CXONE-AL00D-V4
		1 license		CXONE-AL01D-V4
		3 licenses		CXONE-AL03D-V4
		10 licenses		CXONE-AL10D-V4
		30 licenses		CXONE-AL30D-V4
		50 licenses		CXONE-AL50D-V4

Note: Site licenses are available for users who will run CX-One on multiple computers. Ask your OMRON sales
         representative for details.
* The CXONE-AL00D-V4 contains only the DVD installation media for users who have purchased the CX-One Version 4.[]
  and does not include the license number. Enter the license number of the CX-One Version 4.[] when installing.
   (The license number of the CX-One Version 3.[] or lower cannot be used for installation.)

last update: December 3, 2018

OMRON CS1W-LCB01 / LCB05 catalog

CS1W-LCB01 / LCB05 Loop Control Boards/Catalog

• Catalog
• Manual
• CAD

English

Global Edition

For ordering in Singapore, please note some product models not sold in Singapore may be included in the following catalog(s) for our global customers.

*It is recommended to select “Save” from the right-click due to large size of catalog PDF data.

Catalog Name	Catalog Number [size]	Last Update
CS Series Catalog	P051-E1-10 [3438KB]	Dec 03, 201820181203	CS Series Catalog

OMRON CS1W-LCB01 / LCB05 dimension

CS1W-LCB01 / LCB05 Loop Control Boards/Dimensions

last update: November 21, 2013

CS1W-LCB01
CS1W-LCB05(-GTC)

last update: November 21, 2013

• NO. CS1W-LCB01 / LCB05
• TYPE:Programmable Controllers CS1 CPU Bus Units
• DATE:2021-06-14
• Associated products:
  CJ1W-PH41U / AD04U CJ-series Process Analog I/O Unit/Features CS Series Programmable Controllers/Features