OMRON CRT1-TS04T / TS04P lineup

last update: October 17, 2012

Name	Specifications			Model
	Input/Output	Points	Specifications
Temperature Input Unit	Thermocouple Input	4 inputs	Switchable between R, S, K, J, T, E, B, N, L, U, W, and PL2	CRT1-TS04T
	Platinum-resistance thermometer input		PT100 (-200 to 850°C) PT100 (-200 to 200°C)	CRT1-TS04P

last update: October 17, 2012

OMRON CRT1-TS04T / TS04P dimension

last update: November 12, 2012

CRT1-TS04T
CRT1-TS04P

last update: November 12, 2012

OMRON CRT1-TS04T / TS04P specification

last update: October 17, 2012

Basic Performance Specifications

Item	Specification
Communications power supply voltage	14 to 26.4 VDC
I/O power supply voltage *1	20.4 to 26.4 VDC (24 VDC -15%/+10%)
Noise immunity	Conforms to IEC 61000-4-4, 2 kV (power line).
Vibration resistance	10 to 60 Hz with double-amplitude of 0.7 mm, 60 to 150 Hz and 50 m/s2 in X, Y, and Z directions for 80 min each
Shock resistance	150 m/s2 (3 times each in 6 directions on 3 axes)
Dielectric strength	500 VAC (between isolated circuits)
Insulation resistance	20 MΩ min. (between isolated circuits)
Ambient operating temperature	-10 to 55°C
Ambient operating humidity	25% to 85% (with no condensation)
Ambient operating atmosphere	No corrosive gases
Storage temperature	-25 to 65°C
Storage humidity	25% to 85% (with no condensation)
Terminal block screw tightening torque *2	M3 wiring screws: 0.5 Nm M3 mounting screws: 0.5 Nm
Installation	Mounted on 35-mm DIN Track or Mounting Bracket, or secured with M4 screws (depending on model)

*1 The I/O power supply is called the sensor power supply in information for the CRT1-VAD04S.
*2 Applicable only to Slaves to which screw terminal blocks are mounted.

Specifications

Model	CRT1-TS04T		CRT1-TS04P
Input type	Switchable between R, S, K, J, T, E, B, N, L, U, W, and PL2 When set with CX-Integrator: Input types can be set individually for each input. Wen set with DIP switch: The same input type setting applies to all 4 inputs.		Switchable between PT100 (-200 to 850°C) and PT100 (-200 to 200°C) When set with CX-Integrator: Input types can be set individually for each input. When set with DIP switch: The same input type setting applies to all 4 inputs.
Indicator accuracy	(±0.3% of indication value or ±1°C, whichever is larger) ±1 digit max. Indicator Accuracy in Exceptional Cases		-200 to 850°C input range: (±0.3% of indication value or ±0.8°C, whichever is larger) ±1 digit max. -200 to 200°C input range: (±0.3% of indication value or ±0.5°C, whichever is larger) ±1 digit max.
	Input type and temperature range	Input accuracy
	K, T, and N below -100°C	±2°C ±1 digit max.
	U and L	±2°C ±1 digit max.
	R and S below 200°C	±3°C ±1 digit max.
	B below 400°C	Not specified.
	W	±0.3% of indication value or ±3°C (whichever is larger) ±1 digit max.
	PL2	±0.3% of indication value or ±2°C (whichever is larger) ±1 digit max.
Conversion cycle	250 ms/4 points
Temperature conversion data	Binary data (4-digit hexadecimal when Normal Display Mode is selected or 8-digit hexadecimal when 1/100 Display Mode is selected.)
Isolation method	Between input and communication lines: Photocoupler isolation Between temperature input signals: Photocoupler isolation
Mounting method	35-mm DIN track mounting
Communications power supply current	75 mA max. at 24 VDC 110 mA max. at 14 VDC		75 mA max. at 24 VDC 110 mA max. at 14 VDC
Weight	148 g max.		147 g max.

Effects of Mounting Direction on Accuracy

A cold junction compensator is included in the Terminal Block of the CRT1-TS04T. The input accuracy depends on the mounting direction if only the Unit is replaced.

Mounting direction	Input accuracy
Mounted normally	As specified in the Performance Specifications.
Mounted in any direction other than the above	±0.3% of indication value or ±2°C (whichever is larger) ±1 digit max. Indicator Accuracy in Exceptional Cases
	Input type and temperature range	Input accuracy
	K, T, and N below -100°C	±3°C ±1 digit max.
	U and L	±3°C ±1 digit max.
	R and S below 200°C	±4°C ±1 digit max.
	B below 400°C	Not specified.
	W	±0.3% of indication value or ±4°C (whichever is larger) ±1 digit max.
	PL2	±0.3% of indication value or ±3°C (whichever is larger)

last update: October 17, 2012

OMRON CRT1-TS04T / TS04P catalog

• Catalog
• Manual
• CAD

English

Global Edition

For ordering in Singapore, please note some product models not sold in Singapore may be included in the following catalog(s) for our global customers.

*It is recommended to select “Save” from the right-click due to large size of catalog PDF data.

Catalog Name	Catalog Number [size]	Last Update
CompoNet Catalog	P056-E1-08 [4302KB]	May 07, 201820180507	CompoNet Catalog

• NO. CRT1-TS04T / TS04P
• TYPE:Networks CompoNet Analog I/O Slave Units
• DATE:2021-06-10
• Associated products:
  CRT1-AD04 / DA02 Analog I/O Slave Units/Features XWT-[]D08(-1) / []D16(-1) Expansion Units/Features