OMRON G9SB dimension

last update: January 10, 2013

(Unit: mm)

G9SB-200[]-[]
G9SB-3010

G9SB-301-[]-[]

last update: January 10, 2013

OMRON G9SB catalog

• Catalog
• Manual
• CAD

English

Global Edition

For ordering in Singapore, please note some product models not sold in Singapore may be included in the following catalog(s) for our global customers.

*It is recommended to select “Save” from the right-click due to large size of catalog PDF data.

Catalog Name	Catalog Number [size]	Last Update
G9SB Data Sheet	- [983KB]	Jan 21, 201920190121	G9SB Data Sheet

OMRON G9SB lineup

last update: January 10, 2013

Main contacts	Auxiliary contact	Number of input channels	Reset mode	Input type	Rated voltage	Model
DPST-NO	None	2 channels	Auto-reset	Inverse	24 VAC/VDC	G9SB-2002-A
		1 channel or 2 channels		+ common		G9SB-200-B
		2 channels	Manual reset	Inverse		G9SB-2002-C
		1 channel or 2 channels		+ common		G9SB-200-D
3PST-NO	SPST-NC	None (direct breaking)	Auto-reset	---	24 VDC	G9SB-3010 *
		2 channels		Inverse	24 VAC/VDC	G9SB-3012-A
		1 channel or 2 channels		+ common		G9SB-301-B
		2 channels	Manual reset	Inverse		G9SB-3012-C
		1 channel or 2 channels		+ common		G9SB-301-D

Note: 1. Relays with inverse inputs are used mainly when inputting signals from two mechanical switches.
           2. Relays with positive commons are used mainly when inputting signals from a safety sensor or from one
                mechanical switch.
* The G9SB-3010 can be applied to Safety Category 3 of the EN954-1 if double breaking is used.

last update: January 10, 2013

OMRON G9SB specification

last update: January 10, 2013

Ratings

Power Input

Model	G9SB-200[]-[]	G9SB-3010	G9SB-301[]-[]
Power supply voltage	24 VAC/VDC: 24 VAC, 50/60 Hz, or 24 VDC 24 VDC: 24 VDC
Operating voltage range	85% to 110% of rated power supply voltage
Power consumption	1.6 VA/1.4 W max.	1.7 W max.	2.0 VA/1.7 W max.

Inputs

Model	G9SB-200[]-[]	G9SB-3010	G9SB-301[]-[]
Input current	25 mA max.	60 mA max. *	30 mA max.

* Indicates the current between terminals A1 and A2.

Contacts

Model Load	G9SB-200[]-[]	G9SB-3010	G9SB-301[]-[]
	Resistive load
Rated load	250 VAC, 5 A 30 VDC, 5 A
Rated carry current	5 A

Characteristics

Model		G9SB-200[]-[]	G9SB-3010	G9SB-301[]-[]
Contact resistance *1		100 mΩ
Operating time *2		30 ms max.
Response time *3		10 ms max.
Insulation resistance *4		100 MΩ min. (at 500 VDC)
Dielectric strength	Between different outputs	2,500 VAC, 50/60 Hz for 1 min
	Between inputs and outputs
	Between power inputs and outputs
Vibration resistance		10 to 55 to 10 Hz, 0.375-mm single amplitude (0.75-mm double amplitude)
Shock resistance	Destruction	300 m/s2
	Malfunction	100 m/s2
Durability *5	Mechanical	5,000,000 operations min. (at approx. 7,200 operations/hr)
	Electrical	100,000 operations min. (at approx. 1,800 operations/hr)
Failure rate (P level) (reference value)		5 VDC, 1 mA
Ambient operating temperature		-25 to 55°C (with no icing or condensation)
Ambient operating humidity		35% to 85%
Terminal tightening torque		0.5 Nm
Weight		Approx. 115 g	Approx. 135 g	Approx. 120 g

*1. The contact resistance was measured with 1 A at 5 VDC using the voltage-drop method.
*2. Not including bounce time.
*3. The response time is the time it takes for the main contact to open after the input is turned OFF. Includes bounce time.
*4. The insulation resistance was measured with 500 VDC at the same places that the dielectric strength was checked.
*5. The durability is for an ambient temperature of 15 to 35°C and an ambient humidity of 25% to 75%.

last update: January 10, 2013

• NO. G9SB
• TYPE:Safety Units / Safety Relay Units Safety Relay Units Copyright Statement
• DATE:2021-06-09
• Associated products:
  G9SE Safety Relay Unit/Features F3SP-B1P Control Unit/Features