OMRON CS1D CS1D Overview/Features Programmable Controllers--OMRON CS1D Online Store

OMRON CS1DAutomation Systems/ Programmable Controllers/CS1

OMRON CS1D Automation Systems

OMRON CS1D Dimensions

/Images/l_1338-25-118619-198x198.jpg

last update: December 3, 2018

Flexible configuration to suit your system requirements

Choose the level of redundancy needed

Omron offers a diverse range of duplex system configurations to match your system requirements. In addition to dual CPU units and power supply units, you can use dual communications units (Controller Link or Ethernet) and expansion cables.

Supports a variety of network configurations

Redundant communications can be created via Ethernet and Controller Link which is widely used in FA applications.
A variety of networks are available at the I/O level, including open networks DeviceNet and CompoNet with a proven track record in the CS1 Series.

Easy installation and operation of reliable systems

Easy duplexing of CPU units

All programs and data in the active CPU unit are automatically transferred to the standby CPU unit to synchronize them between CPU units.
This eliminates the need to select synchronized data or transfer individually.
When an error occurs in the active CPU unit, the standby CPU unit takes over control immediately (within one cycle time).

The active and standby CPU units always operate synchronously. If an error occurs in the active CPU unit, the standby CPU unit continues control automatically and continuously.

CS1D Features 6

Easy duplexing of communications units

The CPU unit automatically selects the normally functioning communications unit.
There is no need for complex programming to switch when an error occurs or special data link area for duplexing.

CS1D Features 7

Easy duplexing of power supply units

A duplex power supply system can be configured with two power supply units connected to a CPU rack, expansion rack, or long-distance expansion rack, which prevents the system from going down due to a power supply unit error.
A power supply unit that malfunctions can be identified by flags in the AR Area of the CPU unit.

Replace units during power supply

The CPU unit, power supply unit, duplex unit, basic I/O unit, and special I/O unit can be replaced during power supply or operation. In addition, cable disconnections are monitored, so failures can be located easily.

CS1D Features 9

Remove or add units without using a programming device

The duplex CPU, dual I/O expansion system does not require special software or an HMI to replace units online.

CS1D Features 10

Automatic recovery to duplex operation

After the standby CPU unit becomes active due to accidental errors caused by noise or other factors, the stopped CPU unit can be restarted without the need for manipulation by operators and automatically returned to duplex operation.
The period during which only a single CPU unit operates is shortened, maintaining duplex operation to prepare for errors.
(Setting in PLC Setup is required. When hardware breaks down, the CPU unit is not returned to duplex operation after restart. The unit needs to be replaced.)

Improve development productivity

CPU unit with a large program capacity of 400K steps for structured and modular programming [NEW]

Omron offers 10 models of CPU units to suit a variety of purposes and applications, from small- to large-scale systems. By combining I/O units and special units with any CPU unit, you can configure a lean and efficient system.
The CS1D-CPU68HA has a user memory capacity of 400K steps and 25 Extended Data Memory banks. The total memory capacity is 5 MB including user program, data memory, and comment memory. It has sufficient capacity to provide flexibility in structured and modular programming and to be used for larger systems.

CS1D Features 13

Improve development productivity by reusing and sharing programs [NEW]

The CPU unit supports the IEC 61131-3 programming languages: ladder diagram, ST, and SFC. FBs allow you to reuse and share programs, which will improve programming efficiency.
The programs in these languages and using FBs have a higher visibility than conventional ladder programs, making modification and maintenance quicker and easier. FBs, ST, and SFC can be used with the CS1D-CPU[][]HA Duplex CPU System CPU Unit and CS1D-CPU[][]SA Single CPU System CPU Unit.
(ST: Structured Text, FB: Function Block, SFC: Sequential Function Chart)

CS1D Features 14

Reuse software assets [NEW]

The CX-One software can be used even when the CS Series is used together with the CJ Series. Programs and data are compatible with each other, making reuse easier. The specifications of FB and ST supported by the CS1D-CPU[][]HA and CS1D-CPU[][]SA are compatible with those supported by the CS1H/G and CJ2 Series.

CS1D Features 15

Units common to all CS Series

The same I/O units and special units can be used in both the CS1D Duplex System and CS1H/G. This enables parts required for repair and maintenance to be shared between systems, reducing the number of spare parts.

Verify errors on physical devices

The error check (FAL and FALS) instructions can be used to simulate errors. You can verify the behavior of the HMI and other devices for each error state of the duplex CPU units.

CS1D Features 17

last update: December 3, 2018

Purchase the OMRON CS1 Please fill in the following

Title:

Email:

Tel:

Content:

Verification code:

If you have just landed here, this product OMRON CS1D Automation Systems,Automation Systems is offered online by Tianin FLD Technical Co.,Ltd. This is an online store providing Automation Systems at wholesale prices for consumers. You can call us or send enquiry, we would give you the prices, packing,deliverty and more detailed information on the CS1D We cooperate with DHL,TNT,FEDEX,UPS,EMS,etc.They guarantee to meet your needs in terms of time and money,even if you need your OMRON CS1DAutomation Systems tomorrow morning (aka overnight or next day air) on your desk, 2, 3 days or more.Note to international customers, YES, we ship worldwide.

E3ZM-V Color Mark Detection Compact Photoelectric Sensor/Features
ZX-GT Smart Sensor (Wide Laser Beam CCD Measurement Sensor)/Features
D4BL Guard Lock Safety-door Switch/Features
H3DK-G Star-delta Timer/Features
GX-AD0471 / DA0271 Analog I/O Terminal 2-tier Terminal Block Type/Features

OMRON CS1D catalog

CS1D CS1D Overview/Catalog

  • Catalog
  • Manual
  • CAD

English

Global Edition

For ordering in Singapore, please note some product models not sold in Singapore may be included in the following catalog(s) for our global customers.

*It is recommended to select “Save” from the right-click due to large size of catalog PDF data.
Catalog Name Catalog Number
[size] 		Last Update
CS1D Catalog R103-E1-11
[9069KB] 		Dec 03, 201820181203 CS1D Catalog
New Functions Added to CS/CJ/CP Series Catalog P097-E1-01
[1267KB] 		Sep 28, 201520150928 New Functions Added to CS/CJ/CP Series Catalog
FA Controller Catalog P090-E1-07
[18214KB] 		Aug 20, 201820180820 FA Controller Catalog
HMC-EF183 Data Sheet -
[232KB] 		Jun 06, 201220120606 HMC-EF183 Data Sheet


OMRON CS1D lineup

CS1D CS1D Overview/Lineup

last update: September 24, 2012

Please refer to the Data Sheet.

last update: September 24, 2012


OMRON CS1D dimension

CS1D CS1D Overview/Dimensions

last update: September 24, 2012

(Unit: mm)

Please refer to the Data Sheet.

last update: September 24, 2012


OMRON CS1D specification

CS1D CS1D Overview/Specifications

last update: September 24, 2012

Please refer to the Data Sheet.

last update: September 24, 2012


Return to OMRON