OMRON E32-L11FP / L1[]FS, E3X-DA[][]TG-S specification

last update: October 15, 2008

Model	E3X-DA11TG-S	E3X-DA41TG-S
Output	NPN open-collector output	PNP open-collector output
Power supply voltage	12 to 24 VDC ±10%, ripple (p-p) 10% max.
Power consumption	960 mW max. (current consumption: 40 mA max. at power supply voltage of 24 VDC)
Control output	Load power supply voltage: 26.4 VDC, load current: 50 mA max.; residual voltage: 1 V max.
Response time	Tough Mode (TG): Operate/reset in 16 ms each, Super Tough Mode (STG): Operate/reset in 64 ms each Standard Mode (STND): Operate/reset in 1 ms each, High-resolution Mode (HRES) Operate/reset in 4 ms each
Timer function	ON-delay/OFF-delay timer, OFF-delay timer, ON-delay timer, one-shot timer

Note 1: The factory settings are as follows: Tough Mode with an ON-delay/OFF-delay timer.
         2: Be sure to check the chemicals and sprays used in the ambient environment before using the Wet Sensor.

last update: October 15, 2008

OMRON E32-L11FP / L1[]FS, E3X-DA[][]TG-S catalog

• Catalog
• Manual
• CAD

English

Global Edition

For ordering in Singapore, please note some product models not sold in Singapore may be included in the following catalog(s) for our global customers.

*It is recommended to select “Save” from the right-click due to large size of catalog PDF data.

Catalog Name	Catalog Number [size]	Last Update
E32-L11FP/L11FS/L12FS, E3X-DA[][]TG-S Catalog	E392-E1-02 [208KB]	Jul 19, 201820180719	E32-L11FP/L11FS/L12FS, E3X-DA[][]TG-S Catalog

OMRON E32-L11FP / L1[]FS, E3X-DA[][]TG-S dimension

last update: October 15, 2008

E32-L11P

E32-L11FS
E32-L12FS

E3X-DA11TG-S
E3X-DA41TG-S

last update: October 15, 2008

OMRON E32-L11FP / L1[]FS, E3X-DA[][]TG-S lineup

last update: July 19, 2018

Type	Appearance (mm) *	Sensing distance (mm)	Standard object	Min. bending radius (mm)	Features	Model
Limited- reflective	(Free-cut)	8 to 20 mm from the lens tip (recommended sensing distance: 11 mm) 19 to 31 mm from the center of mounting hole A (recommended sensing distance: 22 mm) (See the dimension drawings.)	Glass (t = 0.7 mm)	R40	Materials: Heat-resistant PVC and fluororesin IP67 at 60°C	E32-L11FP 2M
						E32-L11FP 5M
	(Free-cut)	8 to 20 mm from the lens tip (recommended sensing distance: 11 mm) 32 to 44 mm from the center of mounting hole A (recommended sensing distance: 35 mm) (See the dimension drawings.)			Materials: SUS316L and fluororesin IP67 at 85°C	E32-L11FS 2M
						E32-L11FS 5M
					Materials: SUS316L and fluororesin IP67 at 70°C	E32-L12FS 2M
						E32-L12FS 5M

* (Free-cut) Indicates models that allow free cutting.

Amplifier Units

Appearance	Connection method	Functions	Model
			NPN output	PNP output
	Pre-wired model (2 m)	Tough Mode Super Tough Mode ON-delay and OFF-delay timer	E3X-DA11TG-S 2M *	E3X-DA41TG-S 2M *

* Production was discontinued.

last update: July 19, 2018

• NO. E32-L11FP / L1[]FS, E3X-DA[][]TG-S
• TYPE:Fiber Sensors Fiber Amplifier Copyright Statement
• DATE:2021-06-08
• Associated products:
  E3X-SD / NA Simple Fiber Amplifier Unit/Features E3X-DA-S / MDA Digital Fiber Amplifier Unit/Features